Inhaltsverzeichnis
Werbung
Safety message to installers
GB
!
People's lives depend on your safe installation of our products. It is
important to read, understand and follow all instructions shipped
with this product and the related add-on products. In addition, listed
below are some other important safety instructions and precautions
you should follow:
• To properly install this product: you must have a good understanding
of automotive electrical procedures and systems, along with
proficiency in the installation and use of safety warning equipment.
• When drilling into a vehicle structure, be sure that both sides of the
surface are clear of anything that could be damaged. Remove all
burrs from drilled holes. To prevent electrical shorts, grommet all
drilled holes through which wiring passes.
• An emergency light system is a high current device. In order for it
to function properly, a separate ground connection must be made.
If practical, it should be connected to the negative battery terminal.
At a minimum, it may be attached to a solid metal body or chassis
part that will provide an effective ground path as long as the
equipment is to be used.
•High voltages are present inside the strobe light equipped models
during and after operation. Ensure that power is disconnected and
wait at least TEN MINUTES before removing the dome.
•Locate the equipment so that the VEHICLE and CONTROLLERS
can be operated safely under all driving conditions.
•You should frequently inspect the equipment to ensure that it is
operating properly and that it is securely attached to the vehicle.
•File these instructions in a safe place and refer to them when
maintaining and reinstalling the product.
8
Werbung
Inhaltsverzeichnis
