Intended Use - aquanique GP 3200 Gebrauchsanleitung

Product Description
Overview
 A Garden Pump GP 3200 /GP 3800 /GP 4500
1 Connection, pressure side, G1 internal thread
2 Transport handle
3 Motor casing
4 ON/OFF switch
5 Power connection cable
6 Pump base
7 Pump casing
8 Water drain screw
9 Connection, suction side, G1 internal thread
10 Water infill screw
T I P
The unit contains cast iron which is subject to a natural corrosion process. This does not impair the function of
the unit.

Intended use

Only use the product described in this manual as follows:
• For transferring water from and draining basins or ponds/pools.
• For irrigating and watering.
• For pumping clear water or rain water.
• Extraction of water from a well.
– Only for irrigation and watering purposes!
• For pumping the water out of water butts/rain barrels or cisterns.
• To boost the pressure of the mains water.
– Max. permissible internal pressure of the pump on the pressure side: 6 bar
• Operate the product in compliance with the technical data. (→ Technical data)
Possible incorrect use
The following restrictions apply to the unit:
• Do not use for long-term operation (e.g. continuous recirculation of the water in a pond).
• Not suitable for salt water.
• Never use for pumping dirty water/waste water.
• Do not connect to the drinking water supply.
• Not suitable for drinking water.
• Do not use for commercial or industrial purposes.
• Do not use in conjunction with chemicals, foodstuff, easily flammable or explosive substances.
- EN -
11