VESTEL ELECTRIC VEHICLE CHARGER Benutzerhandbuch Seite 4

3. Pull the cable to the stand with a rope (guide). First hammer the in the screws to the drilled holes with
the hammer and then fix the screws with a wrench and fix them on the concrete floor. (Figure.3)
4. In order to mount the stand and the cabling work, the appliance's cover must be opened. Remove the
screws as shown in Figure 4 and open the cover of the product, replace the fittings by following the steps
in the figure. (Figure 4.a 4.b 4.c 4.d).
Figure 4a
Figure 3
Figure 4
Figure 4b
English - 3 -
Figure 4c Figure 4d