Folding Handle - Taurus ESSENTIAL 25.6 LITHIUM Bedienungsanleitung

ECO speed.
- To use the hand vacuum:
- Press the hand vacuum extraction button (H) on
the brush vacuum's main body (E). (Fig. 2)
- Turn the appliance on, by using the on/off
switch. (I)
FITTING AN ACCESSORY TO THE HAND
VACUUM:
- Press the hand vacuum extraction button (H) on
the brush vacuum's main body (E). (Fig. 2)
- The hand vacuum is designed in such a way
that it allows the following accessories to be
fitted: (use the combination that best meets your
requirements). (Fig.3)
- Furniture brush: Equipped with a brush at the
end, which brushes the surface as it is used.
- Crevice nozzle: Specially designed for getting
into cracks and difficult corners.
PARKING POSITION:
- This appliance has one parking position for
comfortable and straightforward storage.

FOLDING HANDLE:

- This appliance has a folded handle position for
easy storage. (Fig.4)
CLEANING
- Disconnect the charger from the mains and let it
cool before undertaking any cleaning task.
- Clean the appliance using a damp cloth with a
few drops of detergent and then dry it.
- Do not use solvents, or products with an acid or
base pH such as bleach, or abrasive products,
for cleaning the appliance.
- Do not submerge the appliance in water or any
other liquid, or place it under a running tap.
EMPTYING THE DUST BOX:
- Empty the vacuum deposit when dust is visible
though the transparent walls, when it is full, or
when the vacuum cleaner does not work to its
full potential.
- Press the hand vacuum extraction button (H) on
the brush vacuum's main body (E). (Fig. 2)
Disconnect the dust box from the appliance. (Fig.
5)
- Remove the cloth filter and its protector. (Fig. 6)
- Empty the contents into a suitable rubbish
container.
- Clean the dust box filter.
- Attach the dust box to the appliance.
To reassemble, follow the above instructions but
in reverse.
CHANGING THE FILTERS:
- To remove filters:
- Press the hand vacuum extraction button (H) on
the brush vacuum's main body (E). (Fig. 2)
- Disconnect the dust box from the appliance.
(Fig 5)
- Remove the cloth filter and its protector. (Fig. 6)
- To reassemble the filter, proceed with the above
instructions, in reverse order.
CLEANING THE ROTARY BRUSH:
- Remove the transparent cover from the top of
the motorized brush. (Fig. 7)
- Lift the brush by the piece at the end of the
brush.
- To mount, insert the brush into the anchor, align
the cover with the tabs on the front and press
until you hear the click.
SUPPLIES
- Supplies can be acquired from distributors and
authorised establishments (such as filters, etc. )
for your appliance model.
- Always use original supplies, designed specifi-
cally for your appliance model.
HOW TO REMOVE THE BATTERIES FROM
THE INTERIOR OF THE DEVICE:
Caution: It is important that the batteries are
fully discharged prior to its withdrawal from the
apparatus.
Caution: the appliance must be disconnected
from the mains when removing the batteries.
TO REMOVE THE BATTERIES, ONCE THE
LIFE OF THE APPLIANCE, PROCEED AS
FOLLOWS:
- Open the top shell of the apparatus, removing
previously with the help of a screwdriver fixing
screws (Fig 8)
- Identify the battery wires and cut their. To
prevent the risk of short-circuiting from possible
residual power in the battery, after cutting each
cable use insulation tape to protect the tip. (Fig
8)
- Safely remove the battery from its housing.