belfox 47-21-i Bedienungsanleitung Seite 64

Connector block 6 (SL6) – Push button inputs (for potential-free closing
contacts)
Terminal 21:
Terminal 22:
Terminal 23:
Terminal 24:
Terminal 25:
Terminal 26:
Connector block 7 (SL7) – Safety input Stop & light barrier
(for potential-free opening contacts, see 7.5 and 7.6)
Terminals 27 & 28: Stop-input-Wicket door safety input
Terminals 29 & 30: Connection of the safety light barrier (for the opening
Connector block 8 (SL8) – Safety inputs for 8,2kΩ safety contact edges or
OES-edges (see 7.7 & 7.8)
If 8,2kΩ safety contact edges are used
Terminal 31:
Terminal 32 & 35:
Terminal 33 & 36:
Terminal 34:
If OES-safety contact edges (optoelectronic safety contact edges) are used
31:
Terminal
32:
Terminal
33:
Terminal
34:
Terminal
35 & 36:
Terminals
Button input A: Impulse function (common terminal 22)
Common terminal of the button inputs A & B
Button input B: targeted opening function (common ter-
minal 22)
Button input C: targeted closing function (common termi-
nal 25)
common terminal of the button inputs C & D
Button input D –partial opening function (common termi-
nal 25)
contact of the light barrier
Not used
SE1 – Safety input 1
(Connection of the 8,2kΩ safety contact edges- activated
during closing)
SE2 – Safety input 2
(Connection of the 8,2kΩ safety contact edge - activated
during opening)
Not used
OSE + 12Volt max. 150mA
OSE 1 optoelectronic safety contact edge 1
OSE 2 optoelectronic safety contact edge 2
OSE – 0 volt mass
Not used
16