Werbung
Verfügbare Sprachen
Verfügbare Sprachen
12 Malfunctions
You may be able to rectify the following faults by checking the possible causes yourself.
• E1, E2, E3, E4, E5, E6, HH, 00 or LL appears in the display.
The appliance has suffered a fault. Contact the customer service department.
• The temperature is not low enough.
Is the temperature setting correct (see "Setting the temperature")?
Does the separately installed thermometer show the correct reading?
Is the ventilation system working properly?
Is the appliance set up too close to a heat source?
• When inserting the mains plug, the refrigeration unit does not switch on, but a value is
shown in the temperature display.
Demo mode is activated. Please contact the customer service department.
• Loud running noise.
Is the appliance set up firmly on the floor?
Does
the
Please note that noises caused by the refrigerant circuit cannot be avoided.
• Appliance does not function.
Is the appliance switched on?
Is the plug correctly fitted in the mains socket?
Is the fuse intact?
13 Shutting your appliance down
If your appliance is to be shut down for any length of time, switch it off and disconnect the plug or
switch off or remove the fuse.
Clean the appliance and leave the door open to prevent unpleasant smells.
The appliance complies with the relevant safety regulations and EC Directives 2004/108/EC and
2006/95/EC.
Changes and adjustments of product characteristics are in the interest of an improved product possible at any time –
appliance
cause
product data subject to change, all data supplied without liability.
nearby
items
of
furniture
or
objects
to
vibrate?
14
Werbung
