Taking Out Of Operation And Cleaning - Aura Elite Classic Controller & Tan Plus Bedienungsanleitung

Elite Click & Tan Plus Sprayer

13. Taking Out of Operation and Cleaning

Clean the Spray Tanning System as required, but at the end of the working
i
day/ application or before changing to a different colour as a minimum. Dried
spray tanning lotion makes cleaning more difficult and can even damage the
system.
1) Turn the system off.
2) Divide the spray gun. Press the hook
(Fig. 9 "click") slightly downwards.
Turn the gun front part and gun rear
part against each other.
3) Unscrew the container.
4) Pour any remaining spray tanning lotion
back into the original packaging.
5) Preclean the container and feed tube
with a brush.
6) Clean the ventilating bore (Fig. 10, 1).
7) Pour water into the container. Screw
the container back on.
Do not use flammable materials for
cleaning purposes.
8) Assemble the gun again.
9) Turn on the system and spray the water
into a container or a cloth.
10) Repeat the above procedure until the
water emerging from the nozzle is
clear.
11) Turn off the system and divide the spray
gun.
12) Screw off the container and empty it. Pull
out the feed tub with container seal.
CAUTION! Never clean seals, nozzles or
air holes of the spray gun with
metal objects..
13) Unscrew the union nut and remove the
air cap and nozzle (Fig. 11). Clean the air
cap, nozzle seal and nozzle with a brush
and water.
14) Clean the outside of the spray gun and
container with a cloth soaked in water.
15) Assemble the parts again (see
"Assembly").
9
10
1
11
GB
CLICK
7