Technical Data; Environmental Protection - Aura Elite Classic Controller & Tan Plus Bedienungsanleitung

Elite Click & Tan Plus Sprayer
Malfunction
Customer's skin
appears orange
System no longer
functions during
use
Power source:
Power consumption:
Double insulation:
Sound pressure level*
Sound pressure output*
Oscillation level
Air hose length:
Container capacity:
Weight:
* Measured in accordance with EN 50144-2-7:2000

Environmental protection

The appliance and accessories should be recycled in an environmentally
friendly way. Do not dispose of the appliance with household waste. Support
environmental protection by taking the appliance to a local collection point or
obtain information from a specialist retailer.
Important Note regarding Product Liability!
Due to an EC ordinance in effect since 01.01.1990, the manufacturer is liable for his product
only if all parts originate from or were approved by the manufacturer and the devices
are assembled and operated correctly. The use of other accessories and spare parts can
partially or completely invalidate the liability.
Cause
•
Too much spray tanning
lotion applied
•
Skin was not correctly
prepared
•
High sensitivity to active
ingredient DHA
•
System overheated

Technical Data

230 V ~, 50 Hz
350 W
80 dB (A); Uncertainty K = 4 dB
93 dB (A); Uncertainty K = 4 dB
< 2.5 m/s²; Uncertainty K = 1.5 m/s²
2.8 m
200 ml
approx. 2.8 kg
Remedy
➞ Remove spray tanning
lotion from the skin.
Prepare skin correctly for
new application, reduce
flow setting
➞ Use another shade with
lower concentration of
DHA
➞ Unplug the power plug,
let the system cool down
approx. 30 minutes, do not
bend the hose, check the
air filter, do not cover the
intake slots
GB
11