GB
11. Tips on using the spray tanning system
Before commencing application, check that all necessary protective
measures (nasal plugs, safety goggles, hair covering) have been taken.
Practice on a large piece of cardboard or paper first of all, in order to find the
i
optimal settings for the spray tanning lotion used.
•
Start and end the spray movement
outside the body.
•
Avoid interruptions during the spray
movement.
•
The spray movement should come
from the arm, not just from the wrist.
This ensures that a uniform distance is
maintained between the spray gun and
the body during the spray operation.
Select a distance of 20 - 30 cm, depending
on the desired spray jet width.
Fig. 8 a:
CORRECT Even distance
Fig. 8 b:
INCORRECT uneven distance
will result in uneven tanning
•
Move the spray gun at an even speed
12. After application of the spray tanning lotion
The full tanning effect develops during the first 24 hours after the treatment.
i
•
Allow the spray tanning lotion to dry for 15-20 minutes before getting dressed again.
You can also use the air from the air hose to
i
accelerate the drying process of the spray
tanning lotion. To do this, simply remove the
spray attachment from the handle and switch
the system on (switch in position 2).
•
Do not shower or bathe in the first 6-8 hours after
application, as this will affect the tanning result.
•
Prolonged hot baths and showers should be avoided,
in order to maintain the tanning effect for as long as
possible. Daily moisturization of the skin is also recommended.
6
Elite Click & Tan Plus Sprayer
8
20-30 cm
a
b