Description And Use; Technical Data - Orno OR-DB-YK-118 Bedienungsanleitung

stopień ochrony przycisku:
Ilość dźwięków dzwonka:
wymiary dzwonka:
wymiary przycisku:
waga odbiornika (dzwonka):
waga nadajnika (przycisku):
(EN) Wireless, battery chime OPERA DC
IMPORTANT!
Before using the device, read this manual and keep it for future reference. Making repairs and modifications by yourself will result in the loss of warranty. The
manufacturer is not liable for damage that may result from incorrect installation and operation of the device. Due to the fact that the technical data are subject
to continuous modifications, the Manufacturer reserves the right to amend the characteristics of the product and introduce other design solutions that do not
impair the parameters and usefulness of the product. Additional information about ORNO products is available at: www.orno.pl. Orno-Logistic Sp. z o.o. is not
responsible for the consequences of not following the instructions in this manual. Orno-Logistic Sp. z o.o. reserves the right to introduce changes to the
manual – the current version can be downloaded from the website www.orno.pl. All rights to translation/interpretation and copyrights in this manual are
reserved.
1. Use the device for its intended purpose.
2. Do not immerse the device in water or other liquids.
3. Replace the defective device with a new one.
4. Do not repair yourself.
Every household is a user of electrical and electronic equipment and therefore a potential producer of hazardous waste to humans and
the environment from the presence of hazardous substances, mixtures and components in the equipment. On the other hand, waste
equipment is a valuable material, from which we can recover raw materials such as copper, tin, glass, iron and others. The symbol of a
crossed-out rubbish bin placed on the equipment, packaging or documents attached thereto indicates the necessity of separate collection
of waste electrical and electronic equipment. Products marked in this way, under penalty of a fine, may not be disposed of in ordinary
waste together with other waste. The marking also means that the equipment was placed on the market after the 13
the user's responsibility to hand over the waste equipment to a designated collection point for proper treatment. Used equipment may
also be returned to the seller in case of purchase of a new product in a quantity not greater than the new purchased equipment of the
same type. Information about the available waste electrical equipment collection system can be found at the information point of the shop
and in the municipal office. Proper handling of waste equipment prevents negative consequences for the environment and human health!
Used batteries and/or accumulators should be treated as separate waste and placed in an individual container. Used batteries or
accumulators should be taken to a collection/receipt point for used batteries and accumulators. For information on collection/collection
points, contact your local authority or your local dealer. Used equipment may also be returned to the seller in case of purchase of a new
product in a quantity not greater than the new purchased equipment of the same type. The product is equipped with a portable battery.
Please refer to the following manual for instructions on how to install and remove batteries.
Declaration of conformity
Orno-Logistic Sp. z o.o. declares that the type of radio device: OR-DB-YK-118 wireless chime OPERA DC is compatible with
Directive 2014/53/EU. The full text of the EU declaration of conformity is available at the following Internet address:
Battery chime, easy to install, ideal for doors in homes, apartments, shops etc. or as a paging device for the elderly. Protection class
IP44 allows to mount the button on the outside or in a place with increased humidity. The learning system makes it easy to log in
additional transmitters.
The range between the button and the ringing tone depends on the environmental conditions. Before installation, we recommend that
you test the device at a location of your choice to ensure that its range is not disturbed.
The coverage can significantly reduce: walls, ceilings, metal surfaces, same frequency devices, proximity to electric motors,
transformers, power supplies, computers, etc.
fig. 1 Changing the ringing
tone/logging
fig. 2: ringtone volume control /
logging out
chime power supply:
transmitter power supply (button):
frequency:
transmission:
open field coverage:
IP44
36
78 x 86 x 34 mm
40 x 86 x 20 mm
0,07 kg
0,04 kg

DESCRIPTION AND USE:

1. Use a screwdriver (not supplied) to lift up and open the rear housing in the bell button and remove
the battery protection.
2. Screw or glue the back of the button to the substrate.
3. Remove the receiver battery cover and insert 3 AAA batteries (not supplied) while maintaining
proper polarity.
4. Selection of the ringtone and volume is set with the buttons located on the left side of the ringtone
(receiver) by short pressing and releasing the buttons.
Logging
Press and hold the volume button for
approx. 3 sec. (until you hear the
melody) release the button and then
press the call button on the transmitter.

TECHNICAL DATA*:

3xAAA (not included)
1x23A
433,92 MHz
radio
100 m
MOUNTING
USE
Connecting the button with the chime
Logging out
Pull the battery out of the receiver after approx. 5 sec,
put the battery in the pocket and press and hold the
volume button for approx. 10 sec. (until you hear the
melody a second time) and then release the button.
All assigned transmitters should be erased from the
receiver's memory.
2
User manual
th August 2005. It is
www.orno.pl