Funke U3 Einbauanleitung Seite 6

Figure 3:
Marking the measurement B (pipe crown, ovoid pipe to top of bore hole)
Dimension B: select dimension from table „Connection dimensions U3
Spirit level
bottom of U3 junction
Figure 4:
Bore hole on an installed pipe
soil
10
GB
concrete polymer concrete
® " for Ovoid pipes made of or
measuring tape
90°
core hole diameter
212 mm ± 1 mm,
at 90° angle to pipe axis
shoring
rotary support
or square timber
Ovoid concrete pipe
(DIN EN 1916): Table of connection dimensions U3
Note: The top of the bore hole can be in the range between measurements
B: Distance from pipe crown, main sewer pipe to top of drill bit to obtain the minimum installation height (D min.)
C: Distance from pipe crown, main sewer pipe to top of drill bit to obtain the maximum installation height (D max.)
Bore hole diameter: 212 mm ± 1 mm
Nominal diameter, main sewer pipe
350/525 400/600 500/750
(width/height) inside [mm]
Total height
Main sewer pipe H 850 850
[mm]
Lower edge, base
=> Bottom inside A 200 150
[mm]
Measurement for
B 408 451
drilling the core
hole [mm]
366 389
C
(top of bore hole)
Bottom of main
59 66
D min.
sewer pipe inside
=> bottom of U3
101 128
D max.
junction [mm]
The pipe measurements have to be checked by the customer, measurements with reservation.
Ovoid polymer concrete pipe
(DIN EN 14636-1 und ISO 18672-1): Table of connection dimensions U3
Note: The top of the bore hole can be in the range between measurements
B: Distance from pipe crown, main sewer pipe to top of drill bit to obtain the minimum installation height (D min.)
C: Distance from pipe crown, main sewer pipe to top of drill bit to obtain the maximum installation height (D max.)
Bore hole diameter: 212 mm ± 1 mm
Nominal diameter, main sewer pipe
400/600 500/750 600/900
(width/height) inside [mm]
Total height
730 900
Main sewer pipe H
[mm]
Lower edge, base
80 90
=> Bottom inside A
[mm]
Measurement for
401 544
B
drilling the core
hole [mm]
C 401 1.) 518
(top of bore hole)
Bottom of main
D min. 66 84
sewer pipe inside
=> bottom of U3
D max. 66 110
junction [mm]
Due to the relatively small wall thickness of the main (receiving) pipe, no clearance in the tapping position.
1.)
The pipe measurements have to be checked by the customer, measurements with reservation.
Figure 5:
Bore hole on a pipe before installation
lashing strap
ratchet
sqare timbers
connection see Figure 3.
®
B and C.
600/900 700/1050 800/1200 900/1350 1000/1500
1050 1200 1380 1560 1740 1920
180 180 195 210 225 240
604 739 885 1025 1167 1308
504 597 703 816 919 1026
84 98 117 142 165 189
184 240 299 351 413 471
B and C.
700/1050 800/1200 1000/1500 1200/1800 1400/2100
1070 1233 1410 1760 2090 2440
100 110 120 150 160 190
689 830 965 1238 1515 1785
592 686 756 956 1166 1369
98 117 142 189 232 282
195 261 351 471 581 698
rope loop
lashing strap
1200/1800 1400/2100
2280 2620
270 290
1595 1865
1246 1449
232 282
581 698
connection see Figure 3.
®
soil
11