Set Up The Pc - HEIDELBERG Suprasetter A106 Installationsanleitung

Set up the PC

Danger! High Voltage!
Even when the PC is switched off, parts in the PC are still live.
The PC may not be connected to the power supply during installation of the
cards.
The Suprasetter must be switched off.
Fig. 64 PC connections
The operating system will detect new hardware when the PC is switched on for the first time. If nec-
essary, update the driver of the card matching your operating system.
Enter the Ethernet address:
"0" deletes the value.
RETURN leaves the old value.
Internet address :
New address :
Net mask:
Tab. Ethernet card
Suprasetter A106 – Installation
An example of a setup is shown here (Fig. 64). The
real setup can deviate from this illustration.
Take the Ethernet and the Gigabit cards from the
accessories kit and install them in the PC.
Connect the Gigabit cable (Fig. 64/1) and the
Ethernet cable (Fig. 64/2).
Install Prinect Shooter , CTP User Interface and DIAG
on this computer.
172.16.0.3
255,255,255.0
DANGER
Installation
67