3. Initial operation
3.2 Measurement and calculation
Inner side of door up to dead-bolt
stop (A)
0.0 mm to 5.95 mm
34 / 80
1. Measure the distance between the inside of the
door and the dead-bolt stop (A), e.g. with the
depth rod of a caliper gauge.
2. Measure the thickness of the door/door panel (B).
3. Refer to the tables for the parts required from the
scope of delivery (adapter plates, dead-bolt fixture,
flange extensions and screw). Additional parts can
be ordered (see manual).
Adapter plate P
(LL.PLATE5)
None
SmartLocker AX
Dead-bolt fix-
ture R
4 (5.9 mm)
EN