Klarstein TASTEMAKER COMPACT 10030114 Bedienungsanleitung Seite 18

EN
18
6. If the set time has elapsed and the unit is not stopped by the user, it will
continue to run for 1 hour and then stop automatically.
Note: If water needs to be added during operation, press STOP to stop the unit.
After adding water, press START to continue. 7.
7. Press and hold the STOP button for 2 seconds to turn off the unit, then unplug
the unit from the wall outlet.
Notes on operation
1. Do not turn on the unit when the water level is below the MIN mark.
2. If the unit runs dry or overheats, it will turn off automatically. In this case, let
it cool down for a few minutes and then press the reset button on the back of
the unit to restart it.
3. When the unit is in operation, the E04 anti-dry program starts automatically.
As soon as the water level drops below MIN or the unit is removed, the error
message „EO4" appears in the display and the unit stops automatically.
4. As long as the water temperature is below 70 °C, the unit runs through.
As soon as the temperature rises above 70 °C, the device operates with
interruptions.
5. The device is not suitable for preparing open food or soups. The food must be
packed in vacuum bags before cooking.
6. If one of the bags runs out during cooking, remove it and empty the water. Fill
with fresh water, make sure the unit is not blocked, and start cooking again
with a tight bag.
7. When you are done, remove the unit and let it dry.
8. There is a cover on the back that you can remove to clean the heating
element.
9. If the error code „E08" is displayed, it means that the temperature sensor is
not working properly.