Unauthorised Conversion And Production Of Spare Parts; Unpermitted Operation; Transport And Storage - WITA UPH 15 Original Einbau- Und Betriebsanleitung

2.8 Unauthorised conversion and production of spare parts

Modification or conversion of the product is only permitted after prior
consultation with the manufacturer. Only use original spare parts for
repairs. Only use accessories that have been approved by the
manufacturer. The manufacturer shall bear no liability for any
consequences resulting from the use of other parts.

2.9 Unpermitted operation

If the pump is disconnected from the power supply, wait at least 1
minute before reactivating. Otherwise, the pump's inrush current limit
has no effect, which can lead to functional errors or damage to any
connected heating controller.
The pump's operational safety can only be ensured if it is used as
intended. Please observe section 4 of these operating instructions here.
Ensure compliance with the limit values detailed in the technical data.

3 Transport and Storage

After receiving the product, inspect it immediately for damage caused
in transport. Should you detect any transport damage, assert a claim
with the haulier.
Incorrect transport and storage can lead to personal injury or
damage to the product.
• Protect the product against frost, moisture and
damage during transport and storage.
• Only carry the pump by the pump housing,
and never by the connection cable or terminal box.
• If the packaging weakens due to moisture,
this can lead to the pump falling out and causing severe
injury.
All manuals and user guides at all-guides.com
20