Safety-Conscious Work; Safety Instructions For The Operator; Safety Instructions For Installation And Maintenance Work - WITA UPH 15 Original Einbau- Und Betriebsanleitung

All manuals and user guides at all-guides.com

2.5 Safety-conscious work

Observe the safety instructions detailed in this manual, along with the
current national accident prevention regulations. Should the system
operator also have their own internal regulations, these must also be
observed.

2.6 Safety instructions for the operator

• Any existing touch guard protecting moving parts may be neither
removed nor shut down while the system is in operation.
• In the event of a fluid leak, any fluids must be collected or diverted
in a way that prevents hazards to persons and the environment from
arising.
• Prevent hazards arising from electrical energy.
• Observe the instructions in local or general regulations (e.g. IEC,
VDE, etc.), and those of the local energy supplier.
• In the event of hazards arising from the system due to contact with
hot or cold parts, these parts must be fitted with a touch guard.
• Keep flammable substances away from the product.

2.7 Safety instructions for installation and maintenance work

The system operator is responsible for ensuring that all installation
and maintenance work is carried out by qualified personnel. These
persons must also have familiarised themselves in advance with the
product using the operating instructions. Conducting work on the
pump is only permitted when the system is shut down.
Ensure that the device is securely disconnected from the power
supply. Disconnect the device plug to achieve this. Prescribed
instructions for shutting down the device can be found in the operating
instructions. All protective mechanisms, such as a touch guard, must
be correctly reattached after work.
19