Safety Instructions; General; Identification Of Symbols In The Operating Instructions - WITA UPH 15 Original Einbau- Und Betriebsanleitung

2 Safety Instructions

2.1 General

These installation and operating instructions are a part of the product,
and contain basic information that must be observed during
installation, operation and maintenance. For this reason, the installer
and specialist personnel or operators must read these instructions prior
to set-up.
Please observe both the general safety instructions listed under section
2 and the special safety instructions detailed in the other sections.
A copy of the EC Declaration of Conformity is provided with these
instructions. This declaration shall be deemed void in the event of a
modification that has not been agreed with us.

2.2 Identification of symbols in the operating instructions

Note
All manuals and user guides at all-guides.com
General hazard symbol
Warning! Risk of personal injury!
Observe the relevant accident prevention
regulations.
Warning! Danger from electrical voltage!
Prevent hazards arising from electrical energy.
Observe the instructions in local or general
regulations (e.g. IEC, VDE, etc.), and those of the
local energy supplier.
This symbol indicates useful information for
handling the product. It indicates potential
difficulties and aims to ensure safe operation.
17