ELRO K1 Bedienungsanleitung Seite 7

Automatic actions
So it is possible to set an automatic action on a scene. You can assign
one or more conditions to an automatic action. If one or more of these
conditions are met, the automatic action will be executed. For example,
it is possible to have a plug switch on when a door is opened. By
following the steps below you can easily create automatic actions
yourself. In the scene overview, press the plus sign to create an
automatic actions (1). You can then give a name to the automatic action
(2). Add the conditions that will trigger the automatic action (3). This
can be a timer or a button press, for example (4). Then determine which
action should be performed when one or more of the conditions are
met (5). The list of actions will grow as different products are added to
your system (6).
Please note! When only using fire protection products, it is not necessary
to create automatic actions. There are also a number of standard
automatic actions for intrusion protection. You therefore do not need to
set these up yourself either.
-7-