ELRO K1 Bedienungsanleitung Seite 6

Quickly press the button on your ELRO
Connects device 3 times (3). When the
connection with the ELRO Connects
device is successful the LED of the K1
Connector will quickly blink 10 times and
you'll receive a notice in the app.
Please note! The ELRO Connects Water
Detector (FW3801R) doesn't have a
button, use a screwdriver to touch both
sensors 3 times in success.
Congratulations!
You successfully connected an ELRO
Connects product to your app. You can
now name the product and use it in your
app to control with your smartphone, use
in scenes etc.
Scenes
Your ELRO Connects app has 3 pre-installed
operation modes "Home, "Away" and
"Sleep". You can switch between these
operation modes by tapping the button in
the middle of your Home screen and select
the desired mode.
Creating scenes
Press the "Scenes" button at the bottom of the start screen. Here you
can set up various scenes for your ELRO Connects system. It is possible
to add various automatic actions to these scenes to automate
everything. To create a scene, simply press the "+" (1) in the scene
overview. A screen will appear where you can add conditions and link
them to an action that needs to be executed (2). You can also use the
following menu items to set up your own automatic actions. It is
possible to modify a scene by pressing one of the scenes.
-6-