PeakTech 5145 Bedienungsanleitung Seite 25

All manuals and user guides at all-guides.com
1. pressure input (+)
2. differential pressure (-)
3. LCD-display
4. Press
Setup option you want to change or press
mode, press
5. Press
6. Press
to the Setup option you want to change or press
Recall mode, press
7. Press
mode.
8. Press
MAX/MIN/AVG mode, press the
9. Press
rectangular or the diameter circular duct, press
P/V/F
10. battery cover
11. Press
12. Press
seconds to zero out the display.
13. Pitot tube for measuring of airflow
14. Press
to calculate the sample data. In Setup mode, press
Press
to changes the temperature units. In Setup mode, press
to select the desired sample number.
button to turn on the backlight. Press it again to turn off the backlight. Press
button for 3 seconds to start or exit Setup. (See "Changing Setup Options.")
to Changes secondly showing number units. In Setup mode, press
to select the desired sample number.
button to store sample data or press
MAX
to step through the maximum, minimum, and average readings. To exit the
MIN
MAX
button for 2 seconds to return to normal operation
MIN
P/V/F
to show the air velocity, press
P/V/F
to show differential pressure again.
to turn the thermometer on or off.
to freeze or unfreeze the displayed readings. Press
button and hold 2 seconds to enter Recall mode. In Recall mode, press
again to store the displayed setting in memory.
-24-
to scroll to the
to increase the displayed setting. In Recall
to scroll
to increase the displayed setting. In
button to clear sample data in Recall
secondly to show the high and length of a
P/V/F
thirdly to show the air flow, press
button and hold 2
button to enter a Setup option.