Inhaltsverzeichnis
Werbung
Verfügbare Sprachen
Verfügbare Sprachen
All manuals and user guides at all-guides.com
1. Safety Precautions
This product complies with the requirements of the following European Community Directives:
2004/108/EC (Electromagnetic Compatibility).
To ensure safe operation of the equipment and eliminate the danger of serious injury due to short-
circuits (arcing), the following safety precautions must be observed.
Damages resulting from failure to observe these safety precautions are exempt from any legal
claims whatever.
*
Do not use this instrument near high-energy circuits.
*
Do not operate the equipment near strong magnetic fields (motors, transformers etc.).
*
Do not place the equipment on damp or wet surfaces.
*
Do not place water-filled containers on the equipment (danger of short-circuit in case of
knockover of the container)
*
Do not operate the meter before the cabinet has been fully closed.
*
Comply with the warning labels and other info on the equipment.
*
The measurement instrument is not to be to operated unattended.
*
Always start with the highest measuring range when measuring unknown values.
*
Do not subject the equipment to direct sunlight or extreme temperatures, humidity or
dampness.
*
Do not subject the equipment to shocks or strong vibrations.
*
Keep hot soldering irons or guns away from the equipment.
*
Allow the equipment to stabilize at room temperature before taking up measurement (important
for exact measurements).
*
Replace the battery as soon as the battery indicator appears. With a low battery, the meter
might produce false reading.
*
Fetch out the battery when the meter will not be used for long period.
*
Periodically wipe the cabinet with a damp cloth and mid detergent. Do not use abrasives or
solvents.
*
The meter is suitable for indoor use only
*
Do not store the meter in a place of explosive, inflammable substances.
*
Do not modify the equipment in any way
*
Do not place the equipment face-down on any table or work bench to prevent damaging the
controls at the front.
Opening the equipment and service – and repair work must only be performed by qualified
*
service personnel
Measuring instruments don't belong to children hands.
*
1.1 Cleaning the cabinet
Clean only with a damp, soft cloth and a commercially available mild household cleanser. Ensure
that no water gets inside the equipment to prevent possible shorts and damage to the equipment.
-22-
Werbung
Inhaltsverzeichnis
