Remote Control:
1. Mute On / Off
Previous track.
2.
Select mode.
3.
Microphone recording.
4.
Press the "REC" button to
record when a USB or
micro SD card is
connected.
NOTE: Only input from the
microphones will be
recorded.
Decrease microphone
5.
echo effect.
Adjust the bass.
6.
Set the equalizer.
7.
Adjust the microphone
8.
volume.
POWER SUPPLY
This device has a rechargeable lithium battery (3000mAh / 7.4V). Charge
the PS09BT fully (approx. 4 hours) before using it for the first time.
BATTERY CHARGING
Plug the power pack included in the scope of delivery into the [DC In]
charging socket of the device.
The charge status is shown on the display.
Low battery:
Charging process:
Charging finished:
Note:
The battery is permanently installed and may only be replaced by
qualified service personnel.
If the device is not used for a long period of time, the device should
be charged every 2-3 months in order to avoid deep discharge of the
battery.
On / Off (standby).
9.
Play / pause.
10.
Next track.
11.
Set the LED color.
12.
Repeat track (On / Off)
13.
Recording Playback.
14.
Delete microphone
15.
recording.
Increase microphone echo
16.
effect.
Set microphone priority.
17.
Adjust the treble
18.
Adjust the volume
19.
20. USB / SD: track selection,
FM: set frequency
LED lights red.
LED lights orange.
LED lights green.
23