Sharp HT-SBW202 Bedienungsanleitung Seite 9

EN
setting is set to FIXED or STANDARD, not VARIABLE. Consult your TV's user
manual for more detailed information.
If using Bluetooth or AUX IN, ensure that the volume on your source device
is turned up and that the device is not muted.
Remote control does not work
Before you press any playback control button, rst select the correct
source.
Reduce the distance between the remote control and the unit.
Insert the battery with its polarities (+/-) aligned as indicated.
Replace the battery.
Aim the remote control directly at the sensor on the front of the unit (next
to the display).
I hear buzzing or humming
Ensure all cables and wires are securely connected.
Connect a di erent source device (TV, Blu-ray player, etc.) to see if the
buzzing persists. If it does not, the problem may be with the original
device.
Connect your device to a di erent input on the soundbar.
I can't fi nd the Bluetooth name of this unit on my Bluetooth device
Ensure the Bluetooth function is activated on your Bluetooth device.
Re-pair the unit with your Bluetooth device.
Soundbar powers off after 15 mins.
This is an EU regulatory requirement for saving power. When the unit's
external input signal level is not present or too low, the unit will be turned
o automatically in 15 minutes. Please switch on or increase the volume
level of your external device.