Deltafox DG-ESA 1332 Anwenderhandbuch- Originalbetriebsanleitung Seite 29

• Keep connection and exten-
sion cables away from the
prongs.
• Never transport the machine
while the drive is running.
Work intervals:
• After the implement has been
turned off, the cutting cylinder
will continue to rotate for a
few seconds. Keep hands and
feet well away.
• Do not touch the spring tines
before the implement has
been disconnected from the
mains and the spring tines
have come to a complete
standstill. Risk of injury owing
to a sharp implement!
• Only remove plant parts when
the implement is standing com-
pletely still. Ensure that the
grass ejector opening is clean
and free.
• Switch off the power when the
implement is to be transport-
ed, lifted or tilted and when
traversing other surfaces than
grass.
• Children must never play with
the device.
• Always switch off the imple-
ment and disconnect the
power plug. Make sure that all
moving parts have come to a
complete stop:
- Whenever you leave the
implement
- Before you clean the ejector
opening or unblock or un-
clog the implement
- When the implement is not
being used
- Before checking, cleaning
or working on the machine;
- When the power cable is
damaged or has become
tangled
- After contact with a foreign
object. Examine the ma-
chine for damage and carry
out the necessary repairs
before restarting and work-
ing with the machine.
If the machine starts to vi-
brate abnormally, an imme-
diate check must be carried
out,
- search for signs of damage;
- have any necessary repairs
carried out on damaged
parts;
- examine for loose parts and
tighten these.
• Store the implement in a
dry place well out of reach
of children.
CAUTION! The following
states how to avoid damage
to the implement and any
resulting harm to people:
Take care of your implement:
• Switch off the power when
the implement is to be carried
across steps.
• Before switching on the ma-
chine, always check whether
all screws, nuts, bolts and
other fasteners are tightly
secured and that the protec-
tion devices and protective
gratings are in place. Worn
or damaged labels must be
replaced. Never operate the
implement if safety devices
GB
29