Figure 4-7: Psk2 Needed For Connection; Figure 4-8: Congratulations - Cisco Systems Linksys Wireless-G WPC54GR Benutzerhandbuch

Wireless-G Notebook Adapter with RangeBooster
If your network has the wireless security PSK2 (Pre-shared key 2) enabled, this screen will appear.
Passphrase - Enter a Passphrase, also called a pre-shared key, of 8-63 characters in the Passphrase field.
Then click Connect and proceed to Step 3.
3. After the software has been successfully installed, the Congratulations screen will appear. Click Connect to
Network to connect to your network. For more information about the Wireless Network Monitor, refer to
Chapter 5: Using the Wireless Network Monitor.
Congratulations! The installation of the Wireless-G Notebook Adapter is complete.
To check the link information, search for available wireless networks, or make additional configuration
changes, proceed to Chapter 5: Using the Wireless Network Monitor.
Chapter 4: Setting up and Connecting the Wireless-G Notebook Adapter
Setting up the Adapter
All manuals and user guides at all-guides.com

Figure 4-7: PSK2 Needed for Connection

Figure 4-8: Congratulations

9