Troubleshooting - Monsher Inlight 55 Bedienungsanleitung

18
SECTION 4.

Troubleshooting

Very often a malfunction of the appliance occur for minor reasons. So, before you call for
service center, please check whether you can troubleshoot yourself. For this purpose please
check the following possible causes of malfunctions.
Malfunction
The appliance does not
operate
Suction power is not
sufficient
The lamp is not lighting
Possible cause
Faulty fuse
Plug is not properly inserted
into the outlet
There is no voltage in the
power supply system
Incorrect speed selected
Filters are clogged
Faulty fuse
The lamp is burned out or
incorrectly installed
Troubleshooting action
1. Check the fuse of the appliance
2. Make sure that plug is properly
inserted into the outlet
1. Increase suction speed of hood
2. Clean or replace filters
1. Check the fuse of the appliance
2. Make sure that the lamp is
installed correctly or replace it
Русский English