Installing The Attachment Brackets; Installing On Or Under A Desk; Overview Of Settings; Dsp Overview - Tascam ML-4D/OUT-E Bedienungsanleitung

Installing the attachment brackets

By installing the included attachment brackets on this unit,
you can fix it in place on top of or underneath a desk, for
example.
1.
Remove the four screws installed in the left and right
sides of the enclosure.
2.
Align the included attachment brackets with the enclo-
sure.
NOTE
When installing this unit on a desk, align the brackets as
shown in the illustration below.
3.
Use the four removed screws to install the attachment
brackets on the unit.
10
TASCAM ML-4D/OUT-E / ML-4D/OUT-X

Installing on or under a desk

To install this unit on or under a desk, use 4 commercial-
ly-available screws that are suitable for the material and
thickness of the desk.
NOTE
The width of the attachment bracket openings is 7.1 mm.
See the dimensional diagrams at the end of this manual
for details about the attachment brackets.
1.
With the two attachment brackets already installed on
the unit, align the unit with the desk as desired.
2.
Make marks where the screw holes will be made in the
desk.
3.
Drill pilot holes for the screws in the desk.
4.
Attach the unit to the desk with 4 screws.

Overview of settings

Make various settings as necessary according to the con-
nected equipment.
All of the following settings can be made using the dedi-
cated remote control application (TASCAM DCP CONTROL).
Setting the reference level
You can set the analog output headroom (difference be-
tween the maximum and reference levels).

DSP overview

This unit has a built-in DSP mixer. A variety of audio pro-
cesses suitable for different applications and conditions are
available.
All of the following settings can be made using the dedi-
cated remote control application (TASCAM DCP CONTROL).
See the back of this manual for DSP block diagrams.

Mixer

Matrix mixer
This unit has simple matrix mixer functions.
Ducking function
When a mic signal is input, the ducking function can auto-
matically lower the volume of background music or other
sound input through the line input channels.
Ambient noise compensator (ANC) func-
tion
The ANC function can measure ambient noise and auto-
matically adjust the volume to make the main sound source
easier to hear.