Ebode EM Bedienungsanleitung Seite 8

Transmitter - Wall-Mounted Remote Control
Dimmer/Position function:
1. Hold the ON or OFF button pressed to dim or bright.
2. Press the UP or DOWN button shortly to place in position the shutter.
Zone function:
receiver)
EM transmitter for
centralised master control
Place at the door entrance
Tips
- Knowledge base available on
Receivers do not respond to wall switch command?
- Check and/or change the battery if necessary.
- Check the radio signals transceiver RPT, RMA, RMV, TM13 or SC28 security
console is powered on.
July 2009
Installation diagram for centralized shutter control. (RMV
RMV Receivers located
on the ground floor
RMV Receivers located
on the first floor
www.ebodeelectronics.eu.
page 8
Ref : EM
EM Transmitter to
control the ground
floor as a group
EM Transmitter to
control the first
floor as a group
EM