Connecting A Digital Video Recorder; Connecting A Dibos - Bosch DVA-08E Kurzanleitung

RAID Subsystem DVA-08E, -08K, -16K
12

Connecting a Digital Video Recorder

These instructions explain how to connect to the following Digital Video Recorders (DVR):
–
–
–
12.1

Connecting a DiBos 8

The following hardware is required to connect a DiBos:
–
–
–
–
To connect the DiBos 8:
1.
NOTICE!
Two and more subsystems: Make the SCSI connection after you have changed the SCSI ID of
i
the second and the further subsystems.
Due to SCSI 3 specifications, we do not recommend to daisy chain more than three
subsystems (cable length: maximum 12 m / 39.4 ft.).
The DVA-08E does not support daisy chaining.
Figure 12.1 Connecting DiBos 8
1
2
3
4
Bosch Security Systems
DiBos 8
Divar
VIDOS NVR
If you have not ordered a DiBos 8:
Include DB EK 021 in your order. The DiBos 8 is delivered with an pre-installed SCSI host
bus adapter and a 2 m (6.6 ft.) SCSI cable.
If you already have a DiBos 8, but without a SCSI host bus adapter:
You must order DB EK 061. The upgrade kit includes a SCSI host bus adapter and a 2 m
(6.6 ft.) SCSI cable for field upgrade.
If you already have a DiBos 8 with installed host bus adapter, but no SCSI cable is
available:
Order the DVA-ACON-HD68A cable.
If you want to expand an existing system (DiBos and subsystem) with an additional
subsystem:
Order the DVA-ACON-VD680A cable (0.5 m/20 in.) or DVA-ACON-VD68A cable (1 m/
40 in.).
Connect DiBos 8 with the subsystem. Note, switch the DiBos 8 and subsystem off.
Take care of proper connection and tighten the screws of the plug.
DiBos
RAID subsystem(s)
(no daisy chaining for DVA-08E)
SCSI port
CH0-IN
Quick Installation Guide
Connecting a Digital Video Recorder | en
5 CH0-OUT
6 DVA-ACON-HD68A or cable supplied
with DiBos
7 DVA-ACON-VD68A or
DVA-ACON-VD680A
(SCSI connection)
F.01U.027.800 | V4 | 2008.08
91