Napoleon CLEARion Elite Installation Und Betriebsanleitung Seite 20

operating instructions
EN
note:
When only the heat is on (i.e. no flames, no ember bed lights, etc.), the display window will be dim and show H1
or the chosen temperature.
When only the fan is on (i.e. no flames, no ember bed lights, etc.), the display window will be dim and show
FAN.
After the heater is turned off, the blower will continue running for 10 seconds. This helps to remove heat from
the appliance and bring down its temperature.
Power
Privacy Glass
Control
Orange Flame
Blue Flame
Ember Bed
Brightness
20
W415-3030 / 04.30.21
Turns appliance on and off.
Controls the privacy glass.
Settings:
G-1 - Half transparent mode (default)
G-2 - Full transparent mode
G-0 - No transparent mode
Press and hold the button for 5 seconds to lock/unlock the
privacy glass to G-0 status. When unlocked, the appliance will
return to G-1 (default).
Controls orange flame brightness.
Settings:
OF4 - Brightest flame
OF3 - Bright flame
OF2 - Dim flame
OF1 - Dimmest flame
OF0 - Flame off
Controls blue flame brightness.
Settings:
BF4 - Brightest flame
BF3 - Bright flame
BF2 - Dim flame
BF1 - Dimmest flame
BF0 - Flame off
Controls the brightness of the ember bed light.
NOTE: If the ember bed colour is set to L16, the ember bed
brightness setting cannot be changed.
Settings:
B-5 - Fade in and out
B-4 - Brightest
B-3 - Bright
B-2 - Dim
B-1 - Dimmest
B-0 - Off
Continued on next page