cecotec BIGDRY 5000 Bedienungsanleitung Seite 31

ENGLISH
To activate the Wi-Fi mode, hold down the mode button for 5 seconds.
Mode description
Dehumidification mode
If the humidity is 3 % lower than the set humidity, this function will turn off automatically. If it
is 3 % higher, it will turn on automatically.
Automatic dehumidification
Sets the humidity to 55 %.
Forced dehumidification
Under this mode, humidity cannot be set and the air speed cannot be modified.
Rapid drying
Under this mode, humidity cannot be set and the air speed cannot be modified.
Ventilation
Humidity level cannot be set and adjustable speed.
Sleep mode
The device will operate with the lights off (except for the full tank indicator light).
Connectivity and Wi-Fi
In order to link your product with our App, please follow the below steps.
Download the EnergySilence App from Google Play or App Store.
If it is the first time you use it, register an account. If not, log in.
Once you have entered the App, press "+" on the top right-hand corner and tap "BigDry 5000".
Turn on the device and tap the Dehumidification mode button for 5 seconds until the Wi-Fi
indicator starts blinking quickly.
Enter your Wi-Fi password and press confirm.
Then, the linking process will start automatically.
If the automatic linking process fails, press the same button again until the indicator blinks
slowly.
Confirm the Wi-Fi password again and follow the instructions indicated by the App.
31
BIGDRY 5000 ADVANCE CONNECTED