HoMedics BPW-3010-EU Bedienungsanleitung Seite 9

SETTING DATE, TIME AND MEASUREMENT UNIT
It is important to set the clock before using your blood
pressure monitor, so that a time stamp can be assigned
to each record that is stored in the memory. (The setting
range of the year: 2018—2058 time format: 24H)
1. When the monitor is off,
hold pressing "MEM"
button for about 3 seconds
to enter into setting mode.
The blinking numeral
represents [YEAR].
2. Press the "MEM" button to
change the [YEAR]. Each
press will increase the
numeral by one in a
cycling manner.
3. When you get the right
year, press "START/STOP"
button to confirm your
selection and it will turn to
the next step.
4. Repeat steps 2 and 3 to confirm [MONTH] and [DAY].
5. Repeat steps 2 and 3 to confirm [HOUR] and [MINUTE].
6. Repeat steps 2 and 3 to confirm the [MEASUREMENT
UNIT].
7. After confirming the meausrement unit, the LCD will
display all the settings you have done once again and
then turn off.
9 I GB