Targa CR 1.0 A1 Bedienungsanleitung Und Serviceinformation Seite 35

5. Use the – (17) and + (18) buttons to adjust the desired settings (see below) and press OK (12).
6. Press the Menu button (11) again to hide the menu.
The following sections contain a description of the different parameters available in the video
recording menu.
Resolution
The resolution determines the size of the recording in pixels. As a general rule: the higher the
resolution, the more storage space is required.
Your Dashboard Camera supports recording in modern wide-screen format. However, not all of
the resolutions available offer a 16:9 aspect ratio. With the 1140x1080P, QVGA and VGA
settings, the aspect ratio is 4:3.
The following settings are available:
Resolution
QVGA 320x240
VGA 640x480
WVGA 848x480
1280x720P
1440x1080P
1920x1080P
Loop recording
The loop recording time can be defined here. After the preset time a new video file will be created.
Loop recording
Off
3 mins.
5 mins.
10 mins.
Description
Low quality (recommended for Internet applications)
VGA screen quality
Normal quality
Average quality
High quality
Very high quality
Description
Disables loop recording (i.e. recording stops when the memory card is
full and no older files are overwritten). A new video file is automatically
created after 10 minutes. To stop the recording, you must press the OK
button (12) – recording will not stop automatically after a certain time.
A maximum of 3 minutes will only ever be recorded per video. After that
a new video file is created automatically.
A maximum of 5 minutes will only ever be recorded per video. After that
a new video file is created automatically.
A maximum of 10 minutes will only ever be recorded per video. After
that a new video file is created automatically.
CR 1.0 A1
English - 33