Internal Programming; Adjusting The Clock - Campa CAMPAVER BAINS 3.0 Installation Und Betriebsanleitung

5. HOW TO USE YOUR APPLIANCE (CONTINUED)

5.7. Internal programming

There is no internal programming if the Pilot Wire is active.
Internal programming :

5.7.1. Adjusting the clock

In all cases, the time and day settings of the appliance must be adjusted
in order to use programming (factory setting 00:00)
In the event of a power outage lasting more than 12 hours, the time and
day settings of the appliance must be reset.
5.7.1.A. Setting the time
EL
ANUEL
ANUEL
not applicable,
- Press and hold
enter the programming menu.
- Turn the
MANUEL
on the screen. Confirm by pressing the
(Selecting
menu).
MANUEL
-
- Turn the
MANUEL
function from the drop-down menu.
- Change the time by turning the
MANUEL
confirm by pressing the
Change the minutes by turning the
confirm by pressing the
MANUEL
MANUEL
To exit
applicable.
and
MANUEL MANUEL
dial to select
MANUEL MANUEL
takes you out of this settings
is displayed on the screen.
dial to select the
MANUEL
MANUEL
MANUEL
5.7.1.B. Setting the day
MANUEL
Change the day of the week
(DD:MO=Monday, DD:TU=Tuesday,
DD:WE=Wednesday, etc.) by turning
the dial and confirm by pressing
the dial.
To exit, turn the
MANUEL
displayed from the drop-down menu.
Confirm by pressing the
MANUEL
for 3 seconds to
that is displayed
dial.
time setting
dial and
dial.
dial and
dial.
dial until EXIT is
To exit
dial.
Page 55