Campa CAMPAVER BAINS 3.0 Installation Und Betriebsanleitung Seite 44

4. INSTALLATION AND FIXING (CONTINUED)
Fig. D
1 Loosen the lock by approximately 2 turns.
2 Raise it upwards.
Lift the appliance and snap it into place on the wall
bracket.
2
1
Turn the appliance to the right.
Place the appliance on the wall bracket, lower the lock and
tighten it.
CAUTION :
Tightening the lock acts as a child safety feature.
Make sure it is locked for safe use of your appliance.
Page 44
Attach the wall bracket to the 6 locations provided
for this purpose.
Take care to fit the zinc-plated steel washers
supplied with your appliance according to the
diagram shown opposite.