Back View - Snom m9 Schnellstartanleitung

1. When the handset is ready for use, connect one end of the network
cable with the NET port on the back of the base station and the
other end to a LAN port in your network (switch, router, etc.).
2. Connect the 5 V power converter to the wall outlet first, THEN to
the base station.
Reset
button
3. The power indicator comes on and the base station begins to boot.
4. When the base station has booted up, the "Call" LED will start
to blink, indicating that the base station is waiting for handset
registration.
h
andset oVerVieW
Side view
Belt clip
Volume adjust key+-
Adjust volume
Speakerphone key (on/off)
Headset jack connector 2.5 mm
Loudspeaker

Back view

of
speakerphone
RESET 5V 5V DC DC
Power
Net port
connector
• of ringer when call is ringing
• of speaker when in call
snom m9 Quick Start Guide
NET NET
Battery cover
E
N
G
L
I
S
H
15