10.2 Base key functions
Key
Press key briefly
Play OGM
Playback messages
Answering on/off
Play VIP-code
Current number of
ring tones
Confirm delete all
messages
10.3 Outgoing messages
Two outgoing messages of 2 minutes can be recorded (OGM1 and OGM2).
•
Outgoing message 1 for the answering function and possibility for callers to leave a
message.
•
Outgoing message 2 for the answering function without allowing callers to leave a
message on the machine.
10.3.1 Recording outgoing messages (OGM 1 or OGM 2)
•
Press the
-key for 2 seconds to select the OGM.
•
Press the
-key for two seconds.
•
Record the outgoing message after the beep.
•
Press the Stop
10.3.2 Playback the outgoing message
To check the current outgoing message:
•
Press the
-key.
To stop playing the welcome note briefly press the stop key
10.3.3 Select outgoing message
•
Press the
-key for 2 seconds to switch between the 2 outgoing messages.
– O1 = OGM 1
– O2 = OGM 2
•
The internal voice will confirm the set outgoing message.
Esscom Butler E550 TWIN/TRIPLE
Stand-by mode
press key for 2 seconds
None
Select OGM 1 or OGM 2
Delete all messages
-key to stop recording.
Record OGM
None
Record memo
Set VIP-code
Set numbers of
ring tones
Esscom Butler E550 TWIN/TRIPLE
During message
play-back
Go to previous message
Pause
Skip message
Stop recording OGM/Memo
Stop
Increase speaker volume
Decrease speaker volume
Delete message or
delete OGM
.
17