Faq - SOMFY io filaire Anleitung

• Internal program (deactivated by default): In the io thermostat's parameters, it is possible
to create two distinct weekly programs. These programs are saved in the io thermostat
and when activated, the programs will operate automatically in the event of an Internet
interruption. (Default: Night from midnight to 06:00, At Home from 06:00 to 21:00, Night
from 21:00 to midnight). This program incorporates the heating anticipation function, which
can be deactivated in the parameters (NB: there is no heating anticipation with the TaHoma
schedule).

FAQ

Situations
When I touch my thermostat, it is impossible
to modify the temperature setpoint above.
I want to repair my thermostat with a new
TaHoma. How do I do that?
I set a temperature on my product manually,
but it changes after several hours.
What is the difference between using
with TaHoma Schedule and with Internal
schedule?
I have modified the temperature setpoint on
the thermostat: will my thermostat resume
the internal program, or follow the schedule
when it next switches mode?
22
Solutions
Go to the TaHoma interface to untick the
"Thermostat child locking mode" option
You need to reset the thermostat by
pressing and holding the PROG button for
7 seconds.
For TaHoma schedule: TaHoma has sent
an order to follow the schedule again.
For internal program: The thermostat
is switched back to the internal program
automatically.
For TaHoma schedule: You can create
scenarios with your other home equipment.
For internal program: You have the option
of using heating anticipation mode.
Yes, the thermostat will return to its
program when it next switches mode.