Manual: Multi Color Module RB-1.5 / RB-3.0 / RB-3.8
1. Scope of delivery & details
Please check if all listed parts are included and undamaged. Included in delivery:
1 x laser module
1 x manual
2. Preliminary warning notices
1. Please use this device only according to these operating instructions.
2. Do not use the device if there are any visible damages on module, connectors or boards.
3. Never look directly into the light source of a laser source. Danger of blindness!
4. Do not operate the device at high humidity, in the rain or in dusty environments.
5. Protect device against dripping or splashing water.
Warranty claim expires with removal or break of warranty label.
3. Initial operations, safety instructions
1. Make sure to use correct voltage; see in-
formation on device & in this manual.
2. Make sure that the device is not connec-
ted to mains during installation.
3. Installation has to be done by technical
experienced and qualified persons ac-
cording to safety regulations of the res-
pective country.
4. If the device has been exposed to great
temperature changes, do not switch
it on immediately. Condensation water
may damage device.
5. Never use dimmer, RC or other electroni-
cally switched sockets. Whenever possib-
le, do not use the module together with
large appliances (especially fog machi-
nes) on the same mains!
page 4 / 17
6. Ensure that device does not get over-
heated. The module must be mounted
to a solid ground plate. Additional hea-
tsinks are necessary in most cases. It is
the responsibility of the customer to use
heatsinks and/or ventilation in proper di-
mension.