Inhaltsverzeichnis
Werbung
Verfügbare Sprachen
Verfügbare Sprachen
WATER TANK
Remove the water tank horizontally.
HUMIDIFIER
Assemble and use the humidifier as follows:
1. Open the water tank compartment and remove the tank.
2. Unscrew the water tank cap and fill it with cold,fresh tap water.
3. Screw the water tank cap back on and place the tank into the water tank compartment.
4. Connect the mist tube.Connect the power supply and press "Mist Button".
The mist will appear in 2-5 seconds.
5. The light on the function display will be blue when the appliance is working.
The light will turn red when the water tank is empty.
REMOTE CONTROL
INSTRUCTIONS FOR CLEANING
Should you need to clean the fan:
- Unplug the fan from the power outlet.
- Wipe it down with a damp cloth and a small amount of non-abrasive cleaning agent.
- Never get the fan wet.
- Do not use the appliance it if it is wet.
- Clean the air inlet and outlet regularly. You may use a vacuum cleaner for this.
STORAGE INSTRUCTIONS
The fan should be stored in a cool,dry place.
ENVIRONMENTALLY FRIENDLY DISPOSAL
You can help protect the environment. Please remember to respect the local regulations.
Hand in the non-working electrical equipment to an appropriate waste disposal centre.
1. OFF: The OFF button turns the fan unit off.
2. ON/SPEED: Turns the fan on and allows you
to increase/decrease the fan speed.
3. SWING: Turns the oscillating function on or off.
4. TIMER: Operation time can be set as follows: 0.5/1/2/4 hours.
The remaining time will apprear on the LED panel.
5. MODE: Allows you to set the type of air flow-Normal/Nature/
Sleep.
6. MIST: Activates the humidifier and produces mist.
Werbung
Inhaltsverzeichnis
