Installation Declaration; Technical Data - Leister LE 5 000 HT Bedienungsanleitung

Installation declaration

(As defined by the EC Machinery Directive 2006/42; Annex II B)
Leister Technologies AG, Galileo-Strasse 10, CH-6056 Kaegiswil/Switzerland hereby declares that the
incomplete machine
Designation:
Type:
– insofar as is possible from the scope of supply – corresponds to the applicable fundamental requirements of the
EC Machinery Directive (2006/42).
The incomplete machine furthermore corresponds to the requirements of the following EC directive(s):
EC directive(s):
Harmonised standards:
We furthermore declare that the special technical documents pursuant to Annex VII (Part B) have been com-
piled for this incomplete machine and that we are committed to communicate these electronically to the mar-
ket surveillance authorities upon justified request.
Name of the documentation officer: Patrick Rieder, Compliance Manager
The commissioning of the incomplete machine is prohibited until it may be determined that the machine in which
the incomplete machine has been installed corresponds to the provisions of the EC Machinery Directive (2006/42).
Kaegiswil, 28.11.2011
Disposal
Power tools, accessories and packaging should be recycled. For EU countries only: do not dispose of
power tools in your household rubbish! According to the European Directive 2002/96 on waste electrical
and electronic equipment and its implementation in national law, power tools which can no longer be
used must be collected separately and recycled.

Technical data

Voltage
Frequency
Power consumption
Min. Airflow
Max. Temperature
Ambient temperature
Weight
Size
Conformity mark
Protection class I
Technical data and specifications are subject to change without prior notice.
8
Air heater
LE 5000 HT
Electromagnetic Compatibility 2004/108
Low Voltage Directive 2006/95
EN 12100-1, EN 12100-2, EN 60204-1, EN 14121-1,
EN 55014-1, EN 55014-2, EN 61000-6-2,
EN 61000-3-12, EN 61000-3-11,
EN 62233, EN 60335-2-45
Bruno von Wyl, CTO
3 × 400
V~
Hz 50 / 60
kW 10.8
l/min. 635
°C / °F 900 / 1650
°C / °F <100 / 210
kg 2.25
375 × 108 × 112
mm
2
1
Beat Mettler, COO