Herunterladen Inhalt Inhalt Diese Seite drucken

Adapter Connection; Other Connections; Remote Control - LG 22LF491U-ZD Benutzerhandbuch

Vorschau ausblenden Andere Handbücher für 22LF491U-ZD:
Inhaltsverzeichnis

Werbung

Verfügbare Sprachen
  • DE

Verfügbare Sprachen

  • DEUTSCH, seite 17

Adapter connection

(Depending on model)
CAUTION
•  Please be sure to connect the TV to the AC-DC power adapter
before connecting the TV's power plug to a wall power outlet.
Euro scart connection
(Depending on model)
Transmits the video and audio signals from an external device to the
TV set. Connect the external device and the TV set with the euro scart
cable.
Output Type
Current
input mode
Digital TV
Analogue TV, AV
Component
HDMI
1 TV Out : Outputs Analogue TV or Digital TV signals.
•  Any Euro scart cable used must be signal shielded.
CI module connection
(Depending on model)
View the encrypted (pay) services in digital TV mode.
•  Check if the CI module is inserted into the PCMCIA card slot in the
right direction. If the module is not inserted properly, this can
cause damage to the TV and the PCMCIA card slot.
•  If the TV does not display any video and audio when CI+ CAM is
connected, please contact to the Terrestrial/Cable/Satellite Service
Operator.
USB connection
Some USB Hubs may not work. If a USB device connected through a USB
Hub is not detected, connect it directly to the USB port on the TV.
12

Other connections

Connect your TV to external devices. For the best picture and audio
quality, connect the external device and the TV with the HDMI cable.
Some separate cable is not provided.
NOTE
•  Supported HDMI Audio format :
Dolby Digital (32 kHz, 44.1 kHz, 48 kHz),
DTS (44.1 kHz, 48 kHz),
PCM (32 kHz, 44.1 kHz, 48 kHz, 96 kHz, 192 kHz) (Depending on
model)

Remote control

AV1
(TV Out
1
)
The descriptions in this manual are based on the buttons on the remote
control. Please read this manual carefully and use the TV correctly.
Digital TV
To replace batteries, open the battery cover, replace batteries (1.5
V AAA) matching the
Analogue TV
compartment, and close the battery cover. To remove the batteries,
perform the installation actions in reverse.
CAUTION
•  Do not mix old and new batteries, as this may damage the remote
control.
•  The remote control will not be included for all sales market.
Make sure to point the remote control toward the remote control sensor
on the TV.
(Depending on model)
and
ends to the label inside the
A
FAV
P
B
PAGE

Werbung

Inhaltsverzeichnis
loading

Inhaltsverzeichnis