Peaq PDP070 Bedienungsanleitung Seite 34

ENGLISH
HANDSET REGISTER/DE-REGISTER
For details information refer to REGISTER THE
HANDSET/ DEREGISTER THE HANDSET
in chapter "First steps". You can choose one
Base station if there are several available.
TIME SETTING
Date and Time
Date and Time
Set Time Format
Auto Update
DATE AND TIME
For details information refer to SET DATE AND
TIME in chapter "First steps".
SET TIME FORMAT
For details information refer to SET DATE AND
TIME in chapter "First steps".
AUTO UPDATE
Switch on/off the automatically time updates.
PIN
To change the default PIN-codes or enter a
new code, follow the steps:
1. Enter the 4-digit default PIN (0000) and
confirm with the right display button.
2. Enter a new 4-digit PIN and confirm with
the right display button.
3. Repeat the new 4-digit PIN to confirm.
4. A beep sound will indicated the complete
setting.
34
IM_PDP070_150902_V03_HR.indb 34
DISPLAY
Contrast
Possible contrast settings are:
• Low
• Middle
• High
Backlight Time
Possible backlight time settings are: 10s, 20s,
30s or 40s
Name of Handset
To change the default handset name, proceed
as follow:
1. Press the left display button.
2. Enter a new name with the numeric
buttons. Toggle between upper and lower
case with the star button.
RESET HANDSET
Reset handset will only erase your custom
settings. Phonebook, Caller log and SMS will
not be reset.
• Press the right display button to reset.
Reset handset to default
Please note that all previous settings will be
deleted.
1. Press Flash button (
seconds.
2. Confirm with the right display button.
) for least 10
2/9/15 4:03 PM