Herunterladen Inhalt Inhalt Diese Seite drucken

Power Supply; Battery Level; Install Batteries; First Steps - Peaq PDP070 Bedienungsanleitung

Inhaltsverzeichnis

Werbung

Verfügbare Sprachen

Verfügbare Sprachen

ENGLISH

Power supply

Mobile charging station
Place the mobile charging base on an even
surface and plug in.

Install batteries

1. Open the battery compartment cover.
2. Insert the rechargeable batteries (provided)
in the correct polarity (+ and -).
3. Close the battery compartment.
Charge the handset
Place the additional handset on the charging
base to charge the handset.
Notes
Charge the batteries for 16 hours before
first use.
30
IM_PDP070_150902_V03_HR.indb 30
Replace the handsets in the base or
charging unit after use to avoid complete
discharge of the batteries. The batteries
are designed for continuous charging.

Battery level

The battery icon displays the current battery
level.
Note
When the handset is off the base station/
charger, the bars indicate the battery level.
Whilst charging the handset on the base
station, the bars are flashing.

First steps

SWITCH ON/OFF THE HANDSET
Press and hold On/Off switch for approx. 2
seconds to switch the handset on or off.
2/9/15 4:03 PM

Werbung

Inhaltsverzeichnis
loading

Inhaltsverzeichnis