Wahl Bach UTS 10 Betriebsanweisung Seite 17

DE GB NL FR
Connection to the electricity supply
The device must be filled with water. Only then may the de-
vice be connected to the electricity supply (insert the plug in
the wall socket). Connection of the device to the power sup-
ply network must take place in accordance with electric in-
stallation standards and as specified by local laws and regu-
lations. The device must be directly connected to the power
supply network (230V) via an electrical cable and plug.
Avoid danger from damaged power supply cables. In the
event of damage, the device must be replaced by the manu-
facturer or its customer service department, or by an equiv-
alently-qualified person.
Ensure that the addition of this device will not overload the
fuse protection in your mains.
Internal modifications to the product may cause problems
if this work is not carried out by authorized and qualified
technical staff. The warranty only applies if the product has
not been modified in any way, i.e. subject to it being in un-
changed condition.
In order to avoid creating an unsafe situation by inappropri-
ate resetting of the maximum temperature safety device,
this unit may not be powered via an external switching de-
vice (a time switch for example) or connected to a circuit,
which is regularly switched on and off by the power supply
company.
Important: Never connect the plug to the wall
socket if the device is not yet filled with water!
17