Behringer EUROLIVE B15X Schnellstartanleitung Seite 16

30
EUROLIVE B15X/B12X
Setting Up the Live Control App Connection
• Power on the first (usually left-hand) speaker. This speaker will become the MASTER speaker.
• Start the Live Control app on the IOS/Android device.
• Check that the Live Control app is connected and functioning with the single MASTER speaker.
• Power up the second speaker. This speaker will become the SLAVE speaker.
• Check that the main app page shows both MASTER and SLAVE input and balance control.
Main Page (Speakers Linked) Main Page (Speakers Not Linked)
Firmware Update via App
Where possible please update your B12X/B15X firmware using the Live Control app.
To update, go to the Settings Page in the app and look for the "CURRENT FIRMWARE" section. The Live Control app will detect the current firmware version. If a
firmware and automatically check for updates provided that the remote device has access to the Internet. If a newer firmware version is available the app will offer
to download. For example:
• Swipe the update slider toward the right to initiate the firmware update. The update may take several minutes.
• Update progress will be displayed on the app and the B12X/B15X speaker's LCD screen.
Firmware Update Fallback Procedure
In the event that the system cannot be updated using the Live Control app, you may also carry out the update using this fallback procedure:
1. Download the .dfu file with the new firmware version to your remote device from the download section of the respective Behringer product page.
Settings Page
2. Prepare the B12/15X for a Firmware upgrade by following these steps:
a. Power off the speaker.
b. Hold the ENCODER KNOB.
c. Power on the speaker. You will see the following screen:
d. Please select the option "Firmware upgrade" then press the ENCODER KNOB.
e. The B12X/B15X is now ready for the firmware upgrade.
3. On your remote device, select and hold the .dfu file until a pop up window offers options for file transfer.
4. Select the option for sharing via Bluetooth. (NOTE: Some devices need to be paired with the speaker before file transfer.)
5. Select the B12X/B15X speaker for file sharing via Bluetooth.
6. During the file transfer, the LCD screen will display the download progress.
7. After the file transfer is complete, the B12X/B15X speaker will automatically restart and return to the usual startup screen.
31
Quick Start Guide