Dohle ExOn1 DIG DX297.DIG Bedienungsanleitung Seite 18

Operating Instructions
DOHLE Hand Welding ExOn 1 DIG
We retain all copyrights of all descriptions, drawings and schedules contained in these
operating instructions which may not be reproduced nor be made accessible by third parties
or by competitors, neither in whole nor in part, unless we have expressly consented thereto.
Before start-up these operating instructions must be examined carefully because we will not
assume any liability for any failures resulting from improper use. No warranty claims will be
accepted if the hand-held welding and extruding machine has been modified unless this has
been done in consultation with the manufacturer/ supplier.
The extruder shall be used for extrusion weld works only!
These operating instructions should always be accessible by the operator.
For after-sales service and orders please contact:
DOHLE Extrusionstechnik GmbH
Eitorfer Straße 1
D-53809 Ruppichteroth
Telephone: +49 2295 902960
Telefax : +49 2295 902961
E-Mail : info@dohle-extruder.de
www.dohle-extruder.de
Content
1. Description of Type
2. Safety
3. Start-up
4. Error tracing
5. Drawings, Informations
DOHLE Extrusionstechnik GmbH
19
19
21
24
25
18