Renkforce 2299532 Bedienungsanleitung Seite 5

Operating Instructions
20 Megapixel wildlife camera
Item No. 2299532
Intended use
The product is intended for capturing digital photos and video recordings of wild animals.
This user manual contains the full specifications of the camera, together with its operating
instructions. Please read the manual carefully before use and keep it in a safe place for future
reference.
This version of the user manual refers to the latest information as of publication. It uses
screenshots and graphics to introduce the camera in as much detail as possible. Due to
differences in technical R&D and production batches, the screenshots and graphics in this
manual may vary from the interface on the actual camera.
Note: Product specifications are subject to modification.
For safety and approval purposes, you must not rebuild and/or modify this product. If you use
the product for purposes other than those described, the product may be damaged. Read the
instructions carefully and store them in a safe place. Make this product available to third parties
only together with its operating instructions.
This product complies with the statutory national and European requirements. All company
names and product names are trademarks of their respective owners. All rights reserved.
Delivery content
• Wildlife camera
• USB cable
• Wall panel
Up-to-date operating instructions
Download the latest operating instructions at www.conrad.com/downloads or
scan the QR code shown. Follow the instructions on the website.
Explanation of symbols
The symbol with the lightning in the triangle is used if there is a risk to your health,
e.g. due to an electric shock.
The symbol with the exclamation mark in the triangle is used to indicate important
information in these operating instructions. Always read this information carefully.
The arrow symbol indicates special information and advice on operation.
Safety instructions
Read the operating instructions carefully and especially observe the safety
information. If you do not follow the safety instructions and information on
proper handling in this manual, we assume no liability for any resulting
personal injury or damage to property. Such cases will invalidate the warranty/
guarantee.
a) General information
• The device is not a toy. Keep it out of the reach of children and pets.
• Do not leave the packaging material lying around carelessly. This may become
dangerous playing material for children.
• Protect the appliance from extreme temperatures, strong jolts, flammable gases,
steam, and solvents.
• Do not place the product under any mechanical stress.
• If it is no longer possible to operate the product safely, take it out of operation and
protect it from any accidental use. Safe operation can no longer be guaranteed
if the product:
-Is visibly damaged,
-Is no longer working properly,
-Has been stored for extended periods in poor ambient conditions, or
-Has been subjected to any serious transport-related stresses.
• Please handle the product carefully. Jolts, impacts, or a fall, even from a low
height, can cause damage to the product.
• Consult an expert when in doubt about the operation, safety, or connection of the
appliance.
• Maintenance, modifications, and repairs must only be completed by a technician
or an authorised repair centre.
• If you have questions that remain unanswered by these operating instructions,
contact our technical support service or other technical personnel.
• Retaining strap
• Mounting materials
• Operating instructions
Caution:
• To avoid damaging the components, do not attempt to open or repair the PCB
without professional guidance.
• The operating range may be affected by environmental factors and nearby
sources of interference.
• Proper use helps to prolong the lifespan of the camera.
b) Connected devices
• Always observe the safety and operating instructions of any other devices which
are connected to the product.
c) LED light
Attention, LED light:
• Do not look directly into the LED light!
• Do not look into the beam directly or with optical instruments!
d) (Rechargeable) batteries
(Adjust according to number of batteries AND type)
• Correct polarity must be observed while inserting the (rechargeable) batteries.
• The (rechargeable) batteries should be removed from the device if it is not used
for a long period of time to avoid damage through leaking. Leaking or damaged
(rechargeable) batteries may cause acid burns if they come into contact with
skin. For this reason, always use suitable protective gloves to handle damaged
(rechargeable) batteries.
• (Rechargeable) batteries must be kept out of reach of children. Do not leave
(rechargeable) batteries lying around, as there is a risk that children or pets may
swallow them.
• All (rechargeable) batteries should be replaced at the same time. Mixing old and
new (rechargeable) batteries in the device can lead to (rechargeable) battery
leakage and device damage.
• (Rechargeable) batteries must not be dismantled, short-circuited or thrown into
fire. Never recharge non-rechargeable batteries. Risk of explosion!
e) Memory card
• A SD high-speed card (multimedia memory card) Class 6 or above is required for
this camera.
• If you are using a memory card for the first time or the memory card contains
images taken by other cameras that cannot be recognised, format the memory
card first. Do not use memory cards formatted on another digital camera or card
reader.
• Disconnect the power supply to the camera before inserting or removing the
memory card.
• Memory card performance may decline over time. If this occurs, purchase a
replacement memory card.
• The memory card contains delicate components. Do not bend, drop or place
heavy items on the memory card.
• Do not use or store the memory card near strong electromagnets or magnetic
fields, such as speakers or TV receivers.
• Do not use or store the memory card in high or low-temperature environments.
• Keep the memory card clean and avoid exposure to liquids. If the memory card is
exposed to liquid, dry it with a soft cloth.
• When not in use, store the memory card in the card sleeve.
• The memory card may get hot after continued use. This is normal and does not
indicate that the card is faulty.
• If the memory card has been used in a different camera, format the memory card
in the wildlife camera before use.
• Data recorded on the memory card may be damaged in the following situations:
-Improper use of the memory card.
-If the power is disconnected or the memory card is removed during a recording
or when deleting, formatting or reading data.
• When the memory card is full, it will no longer store photos/videos, and a warning
that the memory card is full will be displayed if the record button in SETUP mode
is pressed.