Inhaltsverzeichnis
Werbung
Verfügbare Sprachen
Verfügbare Sprachen
NOW LET'S GET STARTED!
HARDWARE CONTROLS — FRONT PANEL
Bypass Switch
Located on the bottom left hand side of the faceplate is the bypass toggle switch. This switch
engages or disengages the equalizer section of the EQP-WA. By design, it is not a true bypass; but
merely takes the EQ circuitry out of the audio path. More on this is discussed later in the manual.
Power Switch and indicator bulb
Located
on
the
bottom
right
hand
side
of
the
faceplate
is
the
mains
power
toggle
switch. This turns the unit on, and power will be indicated by the adjacent power indicator
bulb.
Boost and Cut - Low Frequency' selector
The rotary switch selects a frequency in the low to lower midrange bands for boost, cut, or
even simultaneous boost and cut to create a desired texture effect to the selected band.
LOW FREQUENCY CONTROL
'Boost' (low frequency)
Controls the amount of gain applied to the band selected by the low frequency selector
with a range from zero (unity gain) to +12dB.
'Cut' (low frequency)
Controls
the
amount
of
attenuation
applied
to
the
band
selected
by
the
low
frequency
selector, with a range from zero (unity gain) to -18dB.
The Low Frequency Control Section.
3
Werbung
Inhaltsverzeichnis
