Renkforce 2335651 Bedienungsanleitung Seite 2

Operating instructions
Audio adapter USB-C to 2 x 3.5 mm audio sockets
Item no. 2335651
Intended use
This product is a high-resolution digital-to-analogue converter with USB-CTM plug and two
3.5 mm audio jacks. It is used to connect headphones, speakers or a microphone to suitable
playback devices (e.g. a tablet or smartphone).
Contact with moisture (e.g. in a bathroom) must be avoided under all circumstances.
For safety and approval purposes, do not rebuild and/or modify this product. If you use the
product for purposes other than those described above, the product may be damaged. In
addition, improper use can result in or other hazards. Read the instructions carefully and store
them in a safe place. Always provide these operating instructions when passing the product
on to a third party.
This product complies with statutory, national and European regulations. All company and
product names contained herein are trademarks of their respective owners. All rights reserved.
Delivery content
• Audio adapter
• Operating instructions
Up-to-date operating instructions
Download the latest operating instructions at www.conrad.com/downloads
or scan the QR code shown. Follow the instructions on the website. The
operating instructions for this product can also be downloaded from this link.
Explanation of symbols
The symbol with an exclamation mark in a triangle points to important information in
these operating instructions which must be observed.
The arrow symbol indicates special information and tips on how to use the product.
Safety information
Read the operating instructions carefully and the safety information in
particular. If you do not follow the safety information and information on
proper handling in these operating instructions, we will assume no liability for
any resulting personal injury or damage to property. Such cases will invalidate
the warranty/guarantee.
• This product is not a toy. Keep it out of the reach of children and pets.
• Do not leave packaging material lying around carelessly. It may become a
dangerous toy for children.
• Protect the product from extreme temperatures, direct sunlight, strong vibrations,
high humidity, moisture, combustible gases, vapours and solvents.
• Do not place the product under any mechanical stress.
• Handle the product with care. Jolts, impacts or a fall even from a low height may
damage the product.
• When setting up the product, ensure that the cables are not pinched, kinked or
damaged by sharp edges.
• Do not use the product when driving a vehicle, operating machinery or performing
any other potentially dangerous activity. You may not hear warning signals and, as
a result, be exposed to hazards.
• If you use the product when playing sports or as a pedestrian, adjust the volume
so that you can still hear environmental noises.
• Do not listen to excessively loud sound over an extended period of time. This may
damage your hearing.
• If it is no longer possible to operate the product safely, stop using it and prevent
unauthorised use. Safe operation can no longer be guaranteed if the product:
- is visibly damaged,
- is no longer working properly,
- has been stored for extended periods in adverse ambient conditions or
- has been subjected to any serious transport-related stress.
• Consult a technician if you are not sure how to use or connect the product, or if
you have concerns about safety.
• Maintenance, modifications and repairs must be performed by a technician or a
specialist repair centre.
• If you have questions which remain unanswered by these operating instructions,
contact our technical support service or other technical personnel.
• Observe the safety information and operating instructions of any other devices
which are connected to the product.
Connections
1 USB-CTM plug
3 3.5 mm audio socket
Usage
Some operating systems are not compatible with this product. Refer to the 'Techni-
cal data' section for information on supported operating systems.
plug (1) to a USB-C
• Connect the USB-C
TM
(e.g. tablet or smartphone).
• You can now connect headphones or a speaker to each of the 3.5 mm audio connections
(2) and (3).
• You can also connect a microphone to connection (2).
Care and cleaning
Do not use any aggressive cleaning agents, rubbing alcohol or other chemical solu-
tions, as these may damage the housing or impair the functioning of the device.
• Disconnect the product from the connected devices before cleaning.
• Use a dry, lint-free cloth to clean the product. Do not allow water to get inside the housing.
• Do not press too hard on the surface when cleaning, as this may lead to scratch marks.
Disposal
Electronic devices are recyclable waste and must not be disposed of in the
household waste. At the end of its service life, dispose of the product according to
the relevant statutory regulations.
You thus fulfil your statutory obligations and contribute to protection of the environment.
Technical data
Sampling rate ....................................8/16/22,05/24/32/44,1/48/96/176,4/192/384 kHz
Signal resolution ................................16/24/32 bit
Supported operating systems ............ Windows
Android™
Operating conditions .......................... -5 to +50 ºC, 20 - 75 % relative humidity
Storage conditions .............................-20 to +60 ºC, 25 - 60 % relative humidity
Dimensions (W x H x D) ....................140 x 30 x 9 mm
Length of connection cable ................8 cm
Weight ...............................................10.6 g
This is a publication by Conrad Electronic SE, Klaus-Conrad-Str. 1, D-92240 Hirschau (www.conrad.com).
All rights including translation reserved. Reproduction by any method, e.g. photocopy, microfilming or capture in electronic
data processing systems, requires the prior written approval of the publisher. Reprinting, also in part, is prohibited. This
publication reflects the technical status at the time of printing.
Copyright 2021 by Conrad Electronic SE.
2 3.5 mm audio/microphone connection
port on your laptop or playback device
TM
8.0 and above; MacOS; Chrome OS;
®
*2335651_v1_0121_02_DS_m_4L_(1)